Login    Forum    Search    FAQ

Board index » Upgrading and Repairing Forum » Desktop PC Hardware




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Star Trek creator Gene Roddenberry’s floppies
 Post Posted: Wed Jan 06, 2016 12:03 pm 
Offline

Joined: Sun Jul 20, 2008 10:50 am
Posts: 508
Location: Phoenix, AZ, USA
I thought this was interesting from a historical use of the PC standpoint as well as data recovery exercise. I do not have a clue who made these PC's. It definitely predates the 5150 based upon style and keyboard...and interesting because it is Star Trek after all. :)

How Star Trek creator Gene Roddenberry’s words were freed from old floppy disks

by Gordon Mah Un
PC World
Jan. 4, 2016

When Gene Roddenberry's computer died, it took with it the only method of accessing some 200 floppy disks of his unpublished work. Here's how this tech mystery was solved....
[Keep reading at this link.]

Bonus: DriveSavers press release


Top 
 Profile  
Reply with quote  
 Post subject: Re: Star Trek creator Gene Roddenberry’s floppies
 Post Posted: Wed Jan 06, 2016 12:25 pm 
Offline

Joined: Sun Jul 20, 2008 10:50 am
Posts: 508
Location: Phoenix, AZ, USA
I am actually surprised the surface emulsion on the floppies held up as well as it did.


Top 
 Profile  
Reply with quote  
 Post subject: Re: Star Trek creator Gene Roddenberry’s floppies
 Post Posted: Wed Jan 06, 2016 2:56 pm 
Offline
Site Admin

Joined: Sun Feb 04, 2007 11:44 am
Posts: 5855
Very interesting, thanks for posting! There were many small or virtually no-name CP/M systems sold in the '70s and '80s that looked like that. The floppy formats during that time could vary a bit but I think the article somewhat overstates the difficulty of reading them.

In the Data Recovery seminars I taught back in the '80s I frequently demonstrated recovering files from damaged floppies. In a class demonstration I would format a diskette, fill it with files, then use a pin or needle to poke a hole in the disk. Since the disks were double-sided this would in fact cause at least two sectors to become unreadable, one on each side of the disk. What was really interesting was that these sectors would be on different tracks since the tracks on one side of a floppy are offset from those on the other side. In any case I then would use disk editor software to read the damaged files, working around the damaged sectors. Worst case I would lose two sectors worth of data, amounting to a paragraph or two (512 bytes per sector for a total of 1,024 bytes) in one or two files. In most cases I could get partial sector reads and would only lose a few words or sentences from one or two of the files.

The most heroic floppy data recovery I know about I actually witnessed during a private tour of the DOD Computer Forensics Lab in 1997. In that example several floppy disks containing evidence in a murder case were destroyed by saw-toothed pinking shears. After creating a splicing procedure they were able to splice the disks back together and successfully read them. This story was even covered on an episode of the Forensic Files titled Shear Luck.

I still have quite a few 5.25" floppies with data on them from that time, some even from CP/M systems. I haven't read them in a while but they have been properly stored and appear to be in perfect condition. One day I plan on resurrecting my "Darth Vadar" Apple ][+ with a Z80 card (enabling it to run CP/M) to see what can or can't be read. Scott.


Top 
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 3 posts ] 

Board index » Upgrading and Repairing Forum » Desktop PC Hardware


Who is online

Users browsing this forum: No registered users and 5 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron